| Jewelry Wire cutters also called "Flush Cutters" | | | | The cutters are necessary to create the finest |
| are important to begin with when making jewelry | | | | jewelry piece you can make. In using cutters, |
| made of wire. Some starters actually use scissors | | | | carefully use with the flat side perpendicular to the |
| since it can actually cut thin wires but actually it | | | | wire then the sharp edge can cut with precision. |
| can damage the scissors after a while. Typical | | | | The flat side of the cutter will leave a flat end |
| wire cutters are available in hardware stores and | | | | while the beveled side will leave a sharp end. |
| hobby stores. A decent pair of wire cutters is | | | | Some tips in using Jewelry wire cutters |
| what's really needed if you want best results. | | | | |
| Flush cutters are uniquely designed for working on | | | | 1. As you cut the wire, always hold both ends. |
| wire piece jewelries. | | | | Wear safety glasses; you'll never know that a |
| The Jewelry Wire Cutters come in 2 types: | | | | small wire may hard your eye. |
| The side cutters- it's an all around cutter that you | | | | 2. If you were to cut a wire from a coil/ spool |
| can use while making the wire jewelry. It is | | | | make sure to have one flat end and one sharp |
| extremely sharp so be very careful when using | | | | end. Through it, you are less likely to be hurt while |
| them. One wrong cut and it can ruin the piece | | | | working on the piece. |
| that you started. | | | | 3. Keep the cutters away from children reach and |
| Top Cutter - is used for trimming excess wires. | | | | do not teach children how to make jewelries. |
| It's also sharp but is designed to be used at | | | | Be it sterling silver, gold-filled, gold, brass or copper |
| snipping wires with less risk of cutting or leaving | | | | wire, there is no hassle in cutting using the |
| unlikable marks on your piece. | | | | Jewelry wire cutter. |